Microtek ScanMaker 4700 Install Manual

Installing and
Getting Started
for the ScanMaker
This document provides information on how to install your Microtek scanner on a PC or Mac using the scanner's USB
interface and describes the features of the five scanner buttons on the front panel of the scanner.
Installation for PC and Macintosh
1. Unpack scanner
Open your scanner package and check the components as
stated in your packing list. Before proceeding any further,
check that you have the items listed on the packing list. If
any item is missing, contact Microtek Customer Service.
Your Microtek ScanMaker scanner comes with a USB
built-in interface. For installation, use the scanner' s USB
port. See the graphic below to locate the different ports on
the back of the scanner, including the scanner accessory
port.
Energy Star Notice
As an ENERGY STAR Partner,
Microtek International, Inc. has
determined that this scanner
meets the ENERGY STAR
guidelines for energy efficiency.
Copyright © 2000 Microtek International Inc.
Accessory Port
USB Port
Power Adapter
Power Switch
Trademarks
® ®
Microtek , ScanMaker , and ScanWizard
registered trademarks of Microtek International Inc.
Adobe ® , Acrobat ® , and PhotoDeluxe
trademarks or registered trademarks of Adobe
®
Systems Incorporated. Caere , OmniPage
PageKeeper ® are registered trademarks of Caere
TM
Corporation. Trellix and Trellix Web
trademarks of Trellix Corporation. Ulead
PhotoImpact ® are registered trademarks of Ulead
® ®
Systems, Inc. Macintosh and Apple
trademarks of Apple Computer, Inc. Windows
registered trademark of Microsoft Corporation. All
other products or name brands are trademarks of
their respective holders.
®
4700
2. Unlock the carriage
1. With the scanner turned off, tilt the scanner on its side
to locate the carriage lever (located at the bottom left
side).
2. Pull the lever towards you slightly until you hear a
"click" which indicates that the scanner carriage has
been unlocked.
3. Install software
For PC Users
1. Turn on your computer.
2. Insert the Microtek CD-ROM into your CD-ROM
®
are
drive. The Microtek Software Installer screen should
TM are
automatically come up.
®
, and
Note: If the Microtek Software Installer screen does not
TM come up automatically, double-click the following in
are
®
and
succession: "My Computer" on your Windows desktop;
are registered the CD-ROM icon; and cdsetup.exe to start the installer
®
is a
program.
http://www.microtek.com
Version
Version
for PC (Windows 98 / 2000 / 2000 PRO)
and Mac (Apple iMac / G3 / G4 with
built-in USB ports)
I49-002796B, March 2000