The Scan Material Status Icon - Microtek ScanMaker IIG User Manual

To use the scan material feature:
Choose the Scan Material command in the Preferences menu.
From the submenu that appears, select your scan material; a
check will appear next to the selected option. The selected
option will also be shown in the Scan Material Status icon
(discussed below).
If your Preview window is close to the right edge of your
Note
monitor, the Scan Material submenu may appear on the left
side instead of on the right (as shown above). To resolve this,
move the Preview window towards the left to create enough
room for the submenu to drop down on the right.

The Scan Material Status icon

Another way to access the Scan Material menu is to use the Scan
Material Status icon, located to the right of the Scan button.
Reference: The Preview Window
Scan Material
Status icon
5-15