Requirements; Voltage - Microtek ScanMaker IIG User Manual

Requirements

• IBM PC 486, Pentiums, or compatibles with a CD-ROM drive
• 8MB RAM; 16MB RAM for full version of Photoshop
• Microsoft Windows 95 or Windows 3.1
• At least 40MB hard disk with 15MB free
• VGA color monitor; color display card; laser printer
(recommended). Photoshop requires a monitor and display
card capable of displaying at least 256 colors.
• Basic knowledge of DOS and Windows, and how to install an
interface card inside the PC.

Voltage

The voltage of the scanner is indicated at the back of the scanner
near the power switch.
Voltage is preset depending on your area, ranging from 100V to
120V (U.S. and Canada), or 100V to 240V (Europe and other
parts).
In the unlikely event that you receive a scanner with a voltage
setting different from the voltage level used in your area, call your
dealer to return the scanner. Scanners marked with 100V to 120V
will not operate with 220-volt power in Europe or South America.
MODEL NO.: MRS- 1200ZS
AC 100-120V~
47-63Hz
CAUTION
1A Max.
U.S. voltage requirements
Hardware Installation
Before you Begin...
2-3