Before You Begin; Unpacking The Scanner - Microtek ScanMaker IIG User Manual

Before You Begin

Unpacking the scanner

Remove the scanner from the box, and save the box and packing
materials in case you need to ship the scanner again.
Upon opening the scanner box, you will see a Packing List that
lists both hardware and software components of your scanner
package, as well as the part numbers for those components.
If any component is missing, call Microtek Sales and provide
information on the missing component and part number. Please be
ready to provide the scanner's serial number and your proof of
purchase as well. Keep the Packing List for your reference in case
you need to order a component in the future.
Note: If you need to ship back the scanner for any repairs, the scanner
must be packed in the original box in which it came. Otherwise, Microtek will
not be responsible for any damage that may be sustained during shipping to
or from Microtek. You may be charged for a new box.
Microtek ScanMaker 45t
Power cord
2-36 Microtek User's Guide for Windows
• Unpack the scanner
• Check requirements
• Check the voltage
SCSI cable
Film Holders and
Accessories
Software