Zoomed Preview - Microtek ScanMaker IIG User Manual

Zoomed Preview

This command displays a magnified view of your image
when you use the Zoom Preview tool.
The zoomed preview is the view of a specific part of the
image shown in higher resolution with more visible detail.
If you have zoomed preview enabled, the view is stored in
memory, and you can easily switch between full page
preview and zoomed preview.
The zoomed preview is different from the zoomed-in view
obtained from the Magnifying Lens tool. The zoomed-in
view is simply an enlarged view, but it is not in high
resolution.
Full page preview Zoomed preview
To use zoomed preview:
Click on the zoom preview tool (leftmost tool in the
Toolbar that looks like a microscope). Move the pointer to
the preview image and draw a scan frame around the area
to be zoomed in, then click inside the scan frame. The
selected area will be magnified to give you the zoomed
preview. For more details, refer to the section on the Zoom
Preview tool.
After you use the zoom preview tool to create the zoomed
preview, the Zoomed Preview option in the View menu will
be enabled. You can then switch between Full Page
Preview and Zoomed Preview as your viewing modes.
Reference: The Preview Window 5-11