Specifications For Flatbed Scanners - Microtek ScanMaker IIG User Manual

Specifications for Flatbed Scanners

Media:
Reflective color or black-and-white originals
Image Sensor:
Linear array CCD with daylight fluorescent
lamp. (For ScanMaker II/IIXE and IIHR: with
three-color filter — red, green, blue).
Scanning Modes:
• ScanMaker E6: Single scanning pass;
30-bit color internal process (24-bit color
external process);
10-bit grayscale internal process (8-bit
grayscale external process);
1-bit black and white; 12 built-in halftones.
• ScanMaker III: Single scanning pass; 36-
bit color; 12-bit grayscale; 1-bit black and
white; 12-built-in halftone patterns.
• ScanMaker IISP/IISPX, and E3: Single
scanning pass; 24-bit color; 8-bit
grayscale; 1-bit black and white; 12 built-
in halftones.
• ScanMaker IIHR and II/IIXE: Three
scanning passes; 24-bit color; 8-bit
grayscale; 1-bit black and white; 12 built-
in halftones.
• ScanMaker IIG: Single scanning pass;
grayscale, and black and white.
Scan Frame:
• ScanMaker III: 8.3" x 13.5"
• ScanMaker II/IIXE, and E3: 8.5" x 13.5"
• ScanMaker IIHR and E6: 8.5" x 13"
• ScanMaker IISP/IISPX and IIG: 8.5" x
11.67"
Optical Resolution:
• ScanMaker III, IIHR, and E6: 600 dpi
horiz. x 1200 dpi vert.
• ScanMaker IISP/IISPX, II/IIXE, IIG, and
E3: 300 dpi horiz. x 600 dpi vert.
Interpolated Resolution:
• ScanMaker III and E6: 4800 dpi horiz. x
4800 dpi vert.
• ScanMaker II/IIXE and IIG: 1200 dpi horiz.
x 1200 dpi vert.
• ScanMaker IISP/IISPX, IIHR, and E3:
2400 dpi horiz. x 2400 dpi vert.
Scan Frame Selections:
• ScanMaker III: From 1/8" to 13.5" in 2-
pixel increments
• ScanMaker IIHR and E6: From 1/8" to 13"
in 2-pixel increments
• ScanMaker IISP/IISPX: From 1/8" to
11.67" in 2-pixel increments
• ScanMaker II/IIXE and E3: From 1/8" to
13.5" in 2-pixel increments
• ScanMaker IIG: From 1/8" to 11" in 2-pixel
increments
Image Controls Brightness Settings:
From -100% to +100% in 1% increments.
Contrast Settings:
From -42% to +49% in 7% increments.
Exposure Time Selections:
From -18% to +747% in 3% increments.
Resolution Settings:
• ScanMaker III, IIHR, and E6: From 6 dpi
to 600 dpi in 6-dpi increments; 600 dpi to
1200 dpi in 12-dpi increments; 1200 dpi to
2400 dpi in 24-dpi increments.
• ScanMaker IISP/IISPX, II/IIXE, IIG, and
E3: From 3 dpi to 300 dpi in 1%
increments; 300 dpi to 600 dpi in 2%
increments; 600 dpi to 1200 dpi in 4%
increments.
Hardware Installation 2-17