Overload Alarm; Platform Level Adjustment - JLG X1000AJ Operation And Safety Manual

SECTION 4 - MACHINE OPERATION

Overload Alarm

If the platform is overloaded all the boom functions are
stopped, the overload icon appears on the platform/remote
LCD display and the alarm sounds. To restore the boom
functions it is necessary to remove the extra load.
TO AVOID SERIOUS INJURY, DO NOT OPERATE MACHINE IF ANY CONTROL
LEVER OR SWITCH CONTROLLING PLATFORM MOVEMENT DOES NOT RETURN
TO THE 'OFF' OR NEUTRAL POSITION WHEN RELEASED.
IF THE PLATFORM DOES NOT STOP WHEN A CONTROL SWITCH OR LEVER IS
RELEASED, REMOVE YOUR FOOT FROM THE FOOT SWITCH AND/OR USE
EMERGENCY STOP SWITCH TO STOP THE MACHINE.
If platform is lifted from the proper mounting position dur-
ing the use of the machine, an alarm will sound and all the
movements of the machine will stop. An error message will
appear on the LCD display of the platform control.
3121783

Platform Level Adjustment

NOTE: The platform will auto-correct to level once another
function is activated. The platform will auto-correct to
level before the requested function is performed.
• To manually Level Up, turn switch counter-clockwise
and hold until desired position is reached.
• To manually Level Down, turn switch clockwise and
hold until desired position is reached.
(Item 22, Figure 4-6.)
4-19