Base And Boom/Jib Alignment - JLG X1000AJ Operation And Safety Manual

SECTION 4 - MACHINE OPERATION
4.4

BASE AND BOOM/JIB ALIGNMENT

The machine uses internal cylinder sensors to calculate the
position of the boom. Using these sensors, the machine can
determine if the boom assembly is completely lowered and
retracted, the jib is lowered, and the turntable is aligned
with the base.
When these conditions are met this symbol
will display in position (6) on the Platform/
Remote Control LCD display.
UNLESS THESE CONDITIONS ARE MET, DRIVE, STEER, TRACK
WIDTH ADJUSTMENT, AND OUTRIGGER MOVEMENT IS PRE-
VENTED.
4-4
1
1. Base/Boom Alignment - Visual Indicator
3121783