Setting Outriggers From The Platform/Remote; Console - JLG X1000AJ Operation And Safety Manual

SECTION 4 - MACHINE OPERATION
Setting Outriggers From the Platform/Remote Console
(Reference Figure 4-6. on page 4-21 for item number location)
Either - Press and hold the outrigger auto-
set and level button 7 (item 7) until OK
appears on the platform LCD display;
AUTO
or
7
Operate each outrigger separately by
pressing button 2 (item 2) to select which
MANUAL
outrigger to control (each outrigger is num-
bered 1 thru 4, see decal, each press of but-
ton 2 displays the outrigger selected on the
LCD display). Press button 7 (item 7) to set
SELECT
that outrigger. The OK will appear on the
2
display when the outriggers are set prop-
erly and the unit is level.
Note: To cycle back to outrigger auto-set
mode, press button 2 (item 2) until the
LCD display shows the normal operating
icons.
4-16
CHECK BUBBLE LEVEL INDICATOR TO CONFIRM UNIT IS LEVEL (BUBBLE IS IN
THE 1° GREEN (CENTER) AREA) AND TRACKS ARE OFF THE GROUND BEFORE
OPERATING THE BOOM FUNCTIONS. IF BUBBLE IN THE LEVEL INDICATOR IS
NOT IN THE GREEN AREA, AFTER USING THE AUTO-LEVEL FUNCTION, SHUT
DOWN THE MACHINE AND HAVE THE MACHINE REPAIRED BY A QUALIFIED
SERVICE TECHNICIAN.
OL00600
3121783