Operating With Outriggers Set To 32° - Restricted Work Area Of Operation - JLG X1000AJ Operation And Safety Manual

SECTION 4 - MACHINE OPERATION
Operating with Outriggers Set to 32° - Restricted Work
Area Of Operation
(See Figure 4-3. and Figure 4-4.)
NOTE: Swing and jib functions will not be allowed in certain
areas.
3121783
If at least one of the outriggers is set in the restricted area
position (32°), the platform/remote control box LCD will dis-
play the symbol for restricted area operation in position 1
which is always visible during the use of the machine in this
set up.
DO NOT OPERATE IF SYMBOL FOR RESTRICTED AREA OF OPERATION IS NOT
DISPLAYED ON THE LCD SCREEN WHEN ANY OF THE OUTRIGGERS ARE IN THE
RESTRICTED AREA POSITION.
If you try to position the boom outside the allowed working
area by rotating the boom, the movement will be stopped
and a message on the LCD display will appear indicating
that it is necessary to rotate in the opposite direction in
order to keep working.
The following illustrations (Figure 4-3. and Figure 4-4.) show
the various areas of allowable boom rotation and jib extend
operation for the different outrigger settings.
4-11