JLG X1000AJ Operation And Safety Manual page 131

SECTION 5 - EMERGENCY PROCEDURES
Movement Of Tracks With Machine Not Aligned:
OPERATION ONLY ALLOWED TO GO TO A CONDITION
SUITABLE TO CARRY OUT THE PROCEDURE INDICATED IN
"MACHINE RE-ALIGNMENT" ABOVE. ALL OTHER USE IS
PROHIBITED.
1. Open the ground control station.
2.
Remove key and insert it into the bypass key
switch (1). Turn switch (right/left) and hold to
activate bypass button (2). The bypass icon will be
displayed.
3.
Press the bypass button (2) to
activate bypass mode and operate
the appropriate drive/stear
functions while extreme caution
while keeping bypass key turned.
5-10
4. Move machine to a proper location to perform
"Machine Realignment" procedure to realign the
machine.
At the end of operation, return bypass key to
5.
its neutral position and return key to its
fastener.
The control circuit board records every activation of the
safety device bypass key.
3121703