Electrocution Hazards - JLG X1000AJ Operation And Safety Manual

that the platform assembly is fully lowered. Face the
machine when entering or leaving the platform.
Always maintain "three point contact" with the
machine, using two hands and one foot or two feet
and one hand at all times during entry and exit.
• Keep both feet firmly positioned on the platform
floor at all times. Never position ladders, boxes,
steps, planks, or similar items on unit to provide
additional reach for any purpose.
• Keep oil, mud, and slippery substances cleaned from
footwear and the platform floor.
3121783
SECTION 1 - SAFETY PRECAUTIONS

Electrocution Hazards

• This machine is not insulated and does not provide
protection from contact or proximity to electrical
current.
1-5