Machine Lifting Points - JLG X1000AJ Operation And Safety Manual

SECTION 4 - MACHINE OPERATION
5. Width of slings must not exceed 2.36 in (60 mm),
the width of the chains must not exceed .984 in (25
mm), the diameter of the ropes must not exceed
.984 in (25 mm) in order not to exert a pressure in
an abnormal direction on the outrigger plate.
USE OF ROPES, CHAINS OR SLINGS WITH LENGTH LESS THAN 10 ft (3m)
COULD CAUSE PERMANENT DAMAGE TO MACHINE OUTRIGGERS.
To lift machine, a separate sling must be attached to each
outrigger using the appropriate lifting points as indicated in
Figure 4-8..
Weight of machine is not spread equally over the four out-
riggers (See Figure 4-9.). Minimum required capacity of the
four ropes, chains or slings used must be no less than 4,409
lb (2000 kg) and their length no less than 10 ft (3m) and all
identical.
3121783
1
Figure 4-8. Machine Lifting Points
1. Outrigger Lifting Lug
OL00320
4-31