Skyguard Operation; Skyguard™ Function Table - JLG X1000AJ Operation And Safety Manual

SECTION 4 - MACHINE OPERATION

SkyGuard Operation

The SkyGuard™ feature is used to provide
enhanced control panel protection. When
the SkyGuard™ sensor is activated, functions
that were in use at the time of actuation will
reverse or cutout and the ground alarm will
beep. The table below outlines these func-
tions.
NOTE: Reverse motion can be stopped by the operator by
releasing the footswitch, depressing the emergency
stop button, or by releasing pressure on the Sky-
Guard™ sensor.
If SkyGuard™ remains activated after function reversal or
cutout, depress and hold the SkyGuard™ Override Switch
(button number 8) to allow normal use of machine functions
until the SkyGuard™ sensor is disengaged.
Main Main
Lift Lift
Up Dn
R C
R = Indicates Reversal is Activated
C = Indicates Cutout is Activated
N/A Indicates the function does not exist for this model
4-22
Table 4-1. SkyGuard™ Function Table
Main Main
Drive
Tele Tele Swing
Forward
In Out
C R C C
!
1. SkyGuard™ Sensor
Figure 4-7. SkyGuard™ Sensor and Override Switch
Tower Tower
Drive
Platform
Lift Lift
Reverse
Up Down
C R C
1
2
2. SkyGuard™ Override Switch
(button number 8)
Location
Platform Jib Go Home
Level Rotate Lift (All Functions)
C C C C
3121783