Control Components - Service; Main Power Contactor Relay; Elevation Limit Switch; Ground Alarm - JLG 1230ES Service And Maintenance Manual

SECTION 5 - CONTROL COMPONENTS
5.2

CONTROL COMPONENTS - SERVICE

Main Power Contactor Relay

The main power contactor relay is located on the bulk-
head on the right-front, inside the compartment as
shown following.
Main Power Relay - Installation
1. Main Power Relay
Note: See (See Figure 5-1.) for electrical wiring connections.

Elevation Limit Switch

Elevation Limit Switch - Installation
1. Attach Screws
2. Elevation Limit Switch
3. Switch Mounting Block
Note: Located on right-front of machine frame behind drive wheel assembly
next to mast.
5-2
2. Attach Screws
4. Mounting Holes in Frame
5. Attach Nuts
– JLG Lift –

Ground Alarm

Ground Alarm - Installation
1. Ground Alarm
Note: Remove the charger/step-plate cover on the rear of the machine,
mounted just above the battery charger.

Warning Beacon - Frame Mounted

Warning Beacon - Installation
1. Beacon Assembly
Note: Located on base frame just above the left rear wheel.
2. Attach Screws
2. Attach Screws
3121222