JLG X1000AJ Operation And Safety Manual page 160

SECTION 6 - GENERAL SPECIFICATIONS AND OPERATOR MAINTENANCE
Table 6-12. Inverter Fault Codes
CODE
Incorrect start
Cause – Incorrect starting procedure.
79 Solution – Check electrical connections. This is generally a temporary
problem due to certain working conditions. If problem persists, replace
inverter.
Pedal wire KO
Cause –
86
Solution – This is generally a temporary problem due to certain working
conditions. If problem persists, replace inverter.
Wrong set batt
Cause – With power connected, battery test detected incorrect batteries
93 fitted.
Solution – Replace batteries with the original ones supplied directly by
JLG.
Current sensor KO
94 Cause – Set up procedure for maximum current in progress.
Solution – Contact JLG after-sales service.
Check up needed
99 Cause –
Solution – Contact Hinowa after.sales service.
6-28
DESCRIPTION
3121783