Figure 34: Measured Values - Harmonics Table - WAGO 750-494 Series Manual

WAGO-I/O-SYSTEM 750
750-494 3-Phase Power Measurement Module
The Table View shows the following values of 1st harmonic (fundamental wave)
and another 3 selectable harmonics of the selected phase:
• Current
• Harmonic distortion THD and HD current
• Voltage
• Harmonic distortion THD and HD voltage
As long as the selection of harmonics is not changed the measured values are
updated every 260 ms.
Figure 34: Measured Values ‒ Harmonics Table
Manual
Version 1.2.0
Commissioning 97