Figure 32: Measured Values - Dc - WAGO 750-494 Series Manual

WAGO-I/O-SYSTEM 750
750-494 3-Phase Power Measurement Module
Selecting DC Measurements, you can see the measured DC components of the
measuring signals, i.e. current, voltage and power.
Select DC mode on the "I/O Module" tab. The AC variables are then not
measured or displayed.
Note: DC measurements are only possible in the cannels L1-IL1 und L2-IL2.
• Current
• Voltage
• Power
Figure 32: Measured Values ‒ DC
Manual
Version 1.2.0
Commissioning 95