Phase L1", "Phase L2", "Phase L3" Tabs; Figure 23: „Phase L1" Tab - WAGO 750-494 Series Manual

84 Commissioning
8.1.2

"Phase L1", "Phase L2", "Phase L3" Tabs

Use the "Phase L1", "Phase L2", "Phase L3" tabs to configure user scaling, min.-
/max. values and general parameters. These settings are saved to the I/O module.
Figure 23: „Phase L1" Tab
In the event that you use current transformers to measure high currents, specify in
user scaling whether you want to take into account the current transformer ratio
CTR when calculating the measured values in the respective phase or not. If yes,
specify the divisor of the current transformer ratio D-CTR, e.g. "50 ". Register 32
and 39 ... 41 are written. For details, see section „Process Image".
WAGO-I/O-SYSTEM 750
750-494 3-Phase Power Measurement Module
Manual
Version 1.2.0