Part 7 Conditions For The Transportation Of The Instrument; Taking Back The Instrument For Repair Or Routine Maintenance - Thermo Scientific Microm HM 430 Instruction Manual

PART 7 CONDITIONS FOR THE
TRANSPORTATION OF THE
INSTRUMENT
7-1 TAKING BACK THE INSTRUMENT
FOR REPAIR OR ROUTINE
MAINTENANCE
Repair or maintenance work are normally carried
out at the site of installation. If this is not possible
for some special reasons, the instrument can be
returned to Thermo Scientific. The contact
address can be found at the beginning of this
instruction manual.
•
To guarantee trouble-free function of the
instrument after transportation, please note
the below-mentioned
transportation preparation.
•
In addition, the conditions for storage and
transportation as mentioned in part 1-2 must
be observed during the entire transportation.
Biohazard:
Please also note the precautionary
measures described in our safety
precautions
hazards!
Measures for closing down:
•
Remove knife or blade and store it in a safe
way.
•
Secure the sledge via the lock of the sledge
as described in part 2-4.
Note:
The locking of the sledge functions as
a brake. In case the instrument is kept
in an inclined way, the braking power
might not be sufficient enough to avoid that the
sledge moves.
•
To lift the instrument, take it on each fore-
parts. During transportation, do not carry the
instrument on the handle. Danger of injury!
measures for the
concerning biological
Microm International GmbH
part of Thermo Fisher Scientific
Otto-Hahn-Str. 1A
69190 Walldorf / Germany
387 756 - English
Thermo Scientific Sliding Microtome Microm HM 430
Caution:
Any shipping of the instrument requires original
packaging materials!
shipping with non-conform packaging are not
covered by the manufacturer warranty! Any
damage repairs resulting in non-conforming
package are fully charged to the sending party.
We reserve the right depending on seriousness of
damage NOT to repair. To order original
packaging materials, please contact Thermo
Scientific or your local, by Thermo Scientific
authorized, dealer.
Caution:
The user must care for a clean and safe
condition of the instrument when returning it
to an appropriate service provider.
Note:
If the original packaging is no longer available,
please contact your local Thermo Scientific
representation.
Damages caused by
37