Henny Penny KFC Velocity Series Operation Manual page 82

Program
Code
Phase 2 of the morning startup procedure is to execute the Start-up Mix operation:
drop all of the oil into the drain pan, filter it for a short time, and pump it back into the
vat. This feature is important in thermally mixing the oil to eliminate cold spots and
eliminate the milky oil in the bottom of the pot.
FC-24
FC-25
FC-26
72
Display
START-UP MIX: ENABLED?
START-UP MIX: PRE-HEAT
MAX TEMP
START-UP MIX: DROP OIL:
TIME
Description
2 2 . . Press "" to accept the new value.
3 3 . . Press "X" to return to default or previous
setting.
There are two choices; Mix or Daily. Mix con-
trols whether or not the Mix operation is per-
formed automatically or manually as part of a
morning start-up. Daily replaces the Mix with
a Daily filter. Some operators may prefer per-
forming a daily filter in the morning instead of
at night. Daily filter is manual only. The unit
prompts for a Daily filter during Start-up if
selected.
Press the + or - button to select either Mix or
Daily, and if Mix, YES or NO to run
automatically.
The Start-up Mix procedure consists of two
steps: 1. Heat up the oil to the Mix Preheat
temperature and 2. Drop the oil, filter, and re-
fill the pot.
1 1 . . Enter a new value by using the product
numbers.
2 2 . . Press "" to accept the new value.
3 3 . . Press "X" to return to default or previous
setting.
Controls the time duration of the draining of
the pot.
1 1 . . Enter a new value by using the product
numbers.
2 2 . . Press "" to accept the new value.