Henny Penny KFC Velocity Series Operation Manual page 72

Menu
SP-18
SP-19
SP-20
SP-21
SP-22
62
Display Name
•
•
•
BULK OIL Press the plus or minus button to select either YES,
SUPPLY? NO, or YES+BSV to indicate if a bulk oil supply is avail-
able for refilling the ATO oil tank and vat with fresh oil.
COOKING: SHOW n/a
PSI?
CHANGE MGR Provides access to change the Manager password
CODE code, which is defaulted to 123 from the factory. The
manager password code is used to access modes such
as Product, Cook, Special Programming, etc.
CHANGE USAGE Provides access to change the Reset Usage password
CODE code, which is defaulted to 123 from the factory. The
Reset Usage password code is used to access the
usage statistics, it does not grant any programming
privileges.
CLEAN-OUT TYPE The Clean-Out function supports two different water
based clean-out modes, Heated and Cold-Soak.
Heated is heated and timed while Cold-Soak is un-
heated and not timed. KFC software is hard-coded for
Cold-Soak only, it cannot be changed.
Function
NONE - Disables tank full signal.
24V=FULL - 24V signal on DTF wires means tank
is full (do not pump). No signal means it is OK to
pump.
24V=OK - 24V signal on DTF wires means it is OK
to pump. No signal means the tank is full (do not
pump).