Table of Contents
Advertisement
26
1 1 . . Press 3. POLISH. A confirm prompt
displays. If the operator selects:
•
NO x, the display returns to the previous
menu.
•
√ YES, the drain opens automatically and
the oil begins draining. Downward pointing
arrows display indicating the vat is
draining.
A 15 minute timer displays and starts. The
oil cycles repeatedly through the drain pan
filtration system until the timer expires,
ultra cleaning the oil, also referred to as a
polish.
When the polish cycle completes, the
display indicates that the oil is returning to
the vat. The control panel chirps and a
timer starts. Once the timer counts down,
IS POT FILLED? displays.
If the unit does not detect the oil returning
to the vat or if the vat sensor detects the
oil is below the full line the message IS
POT FILLED? displays. Check the oil level
to confirm the vat is full.
2 2 . . If the oil is:
•
Level with the hot fill line on the back of the
vat, press √ YES.
•
Not level with the hot fill line on the back of
the vat, press NO x and the filter pump
motor runs for an additional 30 seconds.
Advertisement
Table of Contents
