Table of Contents
Advertisement
Fill the vat with warm water half way to the oil level indicators. This can be done
2 2 ) )
with a 5 gallon bucket or water hose connected to a spigot.
Add 8 to 10 ounces of fryer cleaning solution.
3 3 ) )
Continue to
6.7.5 Perform the Cold-Soak Clean-Out , page 47
4 4 ) )
the Heated Clean-Out , page
6 6 . . 7 7 . . 5 5 P P e e r r f f o o r r m m t t h h e e C C o o l l d d - - S S o o a a k k C C l l e e a a n n - - O O u u t t
NOTICE
Do not use a metal scraper or any type of abrasives to clean
the heating elements.
:
This procedure requires that the water stays in the vat overnight to soak off the crusty
debris on the side of the vat.
If necessary, press the O O F F F F button to power off the unit.
1 1 ) )
Allow the vat, filled with water and cleaner, to soak as long as necessary
2 2 ) )
(overnight).
Use a scrub brush/pad on the vat walls to loosen any crumbs or debris.
3 3 ) )
Carefully clean the elements with a thin scrub brush.
4 4 ) )
Scrub the underside of the lid.
5 5 ) )
Remove and clean the lid gasket.
6 6 ) )
When completely scrubbed clean, press the D D O O N N E E √ √ button. DONE
7 7 ) )
SOAKING?, YES and NO displays.
Press Y Y E E S S , and then press the n n e e x x t t ► ► button.
8 8 ) )
Proceed to
6.7.7 Drain the Water , page
9 9 ) )
6 6 . . 7 7 . . 6 6 P P e e r r f f o o r r m m t t h h e e H H e e a a t t e e d d C C l l e e a a n n - - O O u u t t
NOTICE
Do not use a metal scraper or any type of abrasives to clean
the heating elements.
:
This procedure requires immediate cleaning without soaking overnight.
If necessary, press the O O N N button to power on the unit. =CLEAN OUT=
1 1 ) )
HEATING 78F x! displays.
WAIT. The temperature rises to 194 degrees, and then a 15:00 minute timer
2 2 ) )
starts with a beeper sounding. =CLEAN OUT= cleaning displays.
Use a scrub brush/pad on the vat walls to loosen any crumbs or debris.
3 3 ) )
Carefully clean the elements with a thin scrub brush.
4 4 ) )
Scrub the underside of the lid.
5 5 ) )
Remove and clean the lid gasket. The time on the timer runs out. =CLEAN
6 6 ) )
OUT= *DONE*, and then TURN FRYER OFF displays.
Press the power off button. =DRAIN= DRAIN (hold) and next► displays.
7 7 ) )
Proceed to
6.7.7 Drain the Water , page
8 8 ) )
47.
48.
48.
or
6.7.6 Perform
47
Advertisement
Table of Contents
