Table of Contents
Advertisement
Menu
Display Name
SP-11
COOK MENU
BUTTONS
SP-12
COOK DONE GO
WHERE?
SP-13
AUTO-MENU
MINUTES
SP-14
AUTO-MENU GO
WHERE?
SP-15
COOL TEMP
SP-16
PROD PROG EN-
TER ALL TIMES
FIRST?
SP-17
BULK OIL
DISPOSE?
SP-17A
BULK DISP TANK
FULL SIGNAL
Function
•
6 ITEMS
Refer to 3.3 Display Options section of the Operator's
Manual.
Press the plus or minus button to select:
•
SELECT - to begin preheating when a cook menu
button is pressed.
•
COOK - to begin the cook cycle immediately.
Press the plus or minus button to select the default
cook menu to display after each cook cycle completes.
Press the plus or minus button to select a time in min-
utes. When a selected product begins preheating, and
the drop temperature is reached but a cook cycle is not
started, after X minutes the control automatically re-
turns to a cook menu.
If Auto-Menu feature is enabled, press the plus or
minus button to select a default cook menu that dis-
plays after the timer times out.
Press the plus or minus button to select a global cool
temperature setting.
Press the plus or minus button to select:
•
YES - to step through all the times first, then all
temps and then all pressures.
•
NO - to step through Time1, Temp1, Pressure1 and
then Time2, Temp2, Pressure2, etc.
Press the plus or minus button to select one of three
options:
•
NONE - Dispose by draining into a disposal cart or
shuttle.
•
REAR HOSE - Dispose by pumping through the
rear plumbing connection.
•
FRONT HOSE - Dispose by pumping through the
front hose connection by pressing and holding the
button. I I N N F F O O : The optional front hose kit must be
installed and enabled by a field technician or at the
factory in Tech Mode screen T-4A before it displays
in Special Programming SP-17.
Set to match tank full signal logic of your bulk disposal
tank:
61
Advertisement
Table of Contents
