Henny Penny KFC Velocity Series Operation Manual page 45

Hide thumbs Also See for KFC Velocity Series:
Table of Contents

Advertisement

After covering the vat(s) with a sheet pan, use warm, soapy water and a
1 1 ) )
cleaning sponge to wipe down the external components of the unit. Keep the
sponge dry as possible to prevent the warm, soapy water from splashing in to
the vat, contaminating the oil.
Clean around the vat band being careful not to drip water or drop debris in to the
2 2 ) )
vat.
Wipe off the nylatron filler strips. Once a month a more thorough cleaning is
3 3 ) )
required. Refer to
6.5 Cleaning Nylatron Filler Slides - Weekly , page
Once the daily filter cycle is complete, clean the control board after enabling
4 4 ) )
Wipe Mode. Refer to
6 6 . . 3 3 . . 3 3 C C l l e e a a n n t t h h e e F F r r e e s s h h O O i i l l T T a a n n k k ( ( A A T T O O ) )
• Inspect the fresh oil tank o-rings and replace if damaged or
• Use a small screw driver to gently pry o-rings from their
NOTICE
:
Not used in bulk fill applications.
I I N N F F O O :
The fresh oil tank (box) is a storage tank of fresh oil for the Automatic Top Off (ATO)
system. Daily pull the tank out half-way, lift the lid, and then top off with fresh oil. As
necessary, pull the tank out, clean, and then refill with fresh oil. While the daily filtering
process is cycling do the following:
Pull out the fresh oil tank halfway and open the lid. Refer to
1 1 ) )
Tank , page 13
and
Pull the tank out half way and then lift up, continue pulling out the tank.
2 2 ) )
Empty the oil in to a bulk oil disposal container.
3 3 ) )
Clean the tank with warm soapy water, and then rinse thoroughly.
4 4 ) )
Dry thoroughly, and then install the tank back in to the unit.
5 5 ) )
Add fresh oil to the tank as required.
6 6 ) )
Close the lid and carefully push the fresh oil tank back in to place.
7 7 ) )
6.2 Wipe Mode , page
every 90 days.
groove to inspect for damage. Reinstall by gently rolling
them in to place.
Watch a short video explaining how to lubricate the o-rings
after installation.
Chapter 3 Operation , page
34.
2.9 Fill the Fresh Oil
15.
36.
35

Advertisement

Table of Contents
loading

This manual is also suitable for:

Oxe-100Velocity seriesVelocity oxe-100

Table of Contents