Henny Penny KFC Velocity Series Operation Manual page 46

6 6 . . 3 3 . . 4 4 C C l l e e a a n n t t h h e e D D r r a a i i n n P P a a n n
NOTICE
:
T T R R A A I I N N I I N N G G :
The drain pan is a self-contained assembly underneath the unit that filters and
polishes the oil to prolong oil life. In addition it catches and holds debris such as
breading that falls off product during the cooking cycle. Once the daily filter process
completes do the following:
Carefully pull the drain pan assembly out from under the unit.
1 1 ) )
Remove the lid, clean, dry, and then set aside.
2 2 ) )
Remove the crumb catcher, clean, dry, and then set aside.
3 3 ) )
Remove the filter assembly.
4 4 ) )
Remove the filter envelope and discard.
5 5 ) )
Clean, dry, and then set aside the filter assembly components.
6 6 ) )
Clean, dry, and then set aside the drain pan.
7 7 ) )
Refer to
8 8 ) )
reassemble the drain pan.
Insert the drain pan under the unit until it latches.
9 9 ) )
6 6 . . 4 4 C C l l e e a a n n t t h h e e C C a a s s t t o o r r W W h h e e e e l l s s - - W W e e e e k k l l y y
Spray Henny Penny biodegradable, food safe, foaming degreaser (part no.12226) on
castor wheels at least once a week as part of the normal cleaning routine. This
prevents the long term build up of grease and dirt which can inhibit the normal
operation of the wheels. Wheels laden with grease and dirt may stick or stop rolling
which can make the fryer wobbly and unstable when moving. An unstable fryer can
spill oil or tip over, causing damage to the fryer or serious personal injury.
6 6 . . 5 5 C C l l e e a a n n i i n n g g N N y y l l a a t t r r o o n n F F i i l l l l e e r r S S l l i i d d e e s s - - W W e e e e k k l l y y
The Nylatron Filler Strips prevent food debris from entering the inside of the unit.
Keeping them clean prolongs the life of the strips. Missing, broken or worn strips must
be replaced. Or the internal mechanics of the unit becomes clogged with oil and food
debris.
36
• Inspect the drain pan o-rings and replace if damaged or
every 90 days.
• Use a small screw driver to gently pry o-rings from their
groove to inspect for damage. Reinstall by gently rolling
them in to place.
• Watch a short video explaining how to lubricate the o-rings
after installation.
Watch how to disassemble and reassemble the Drain Pan.
2.7 Drain Pan Assembly , page
8, install a new filter envelope, and then