Henny Penny KFC Velocity Series Operation Manual page 78

Program
Code
I I N N F F O O :
• For very thin (low viscosity) cooking oils, drain opening setting may need to reduce from
the default value and you might need to reduce the drain opening setting from the default
value.
• For 50 Hz systems, or if the control routinely gives up before the pot is refilled, you might
need to increase the max pump time from the default value–50 Hz pumps may run more
slowly than 60 Hz pumps.
FC-12
FC-13
FC-14
68
Display
P P o o l l i i s s h h S S e e t t t t i i n n g g s s
POLISH: DROP OIL: TIME
POLISH: DROP OIL: DRAIN
OPENING
POLISH: FILTER: TIME
Description
completely, press NO and the pump at-
tempts to fill further.
1 1 . . Enter a new value by using the product
numbers.
2 2 . . Press "" to accept the new value.
3 3 . . Press "X" to return to default or previous
setting.
During the Drop cycle, controls the duration
of time the vat drains.
1 1 . . Enter a new value by using the product
numbers.
2 2 . . Press "" to accept the new value.
3 3 . . Press "X" to return to default or previous
setting.
During the Drop cycle, controls how far to
open the drain valve.
1 1 . . Enter a new value by using the product
numbers.
2 2 . . Press "" to accept the new value.
3 3 . . Press "X" to return to default or previous
setting.
At the end of the Drop cycle, controls how
long the filter pump runs for the specified fil-
ter time.