Expanding The Ec-Dss Interface; Technical Specifications - Ec-Dss-Interface - Priva Compass Installation Manual

Priva
EC-DSS interface cable to Compass
Name
MB1
GND
MB2
GND
0 VAC
24 VAC

Expanding the EC-DSS interface

1. Unscrew and open the interface.
2. Screw a connection board 9943 to the bottom plate.
3. Insert an EC interface board 8658 into the connector of the connection board 9943.
4. Screw the interface closed.

Technical specifications - EC-DSS-interface

Article description
Article number
Housing material
Dimensions H x L x W (without grommet)
Connections
Supply voltage
Ambient temperature
92
Function
sensor signal sensor 1
GND
sensor signal sensor 2
GND
0 V
24 V
EC-DSS-interface
3771051
plastic
180 x 165 x 135 mm
on EC-interface board 8658:
• 24 VAC input power supply
• 2 inputs for EC or DSS
• 2 analog outputs
24 VAC
0 ... 35 °C
Connection
UI of Priva Blue ID module
Add a pull-down resistor (100kΩ) to
GND for cable break detection.
FG of Priva Blue ID module
UI of Priva Blue ID module
Add a pull-down resistor (100kΩ) to
GND for cable break detection.
FG of Priva Blue ID module
0 VAC of power supply
24 VAC of power supply
Installing Priva Compass - 00.014