Priva Compass Installation Manual page 20

Priva
1. Strip around 10 cm from the outer sheath of the mains cable.
2. Cut the wires to length. Make sure the earth wire is twice as long as the phase wire and the
neutral wire.
3. Strip the wires.
4. Feed the mains cable through the M20 cable gland.
5. Connect the earth wire (PE) to the earth terminal next to the circuit breaker.
6. Connect the neutral wire (N) to input 2 of the circuit breaker.
7. Connect the phase wire (L) to input 4 of the circuit breaker.
8. Screw tight the cable gland.
If you need to disconnect the mains cable, first disconnect the phase wire (L) and neutral wire (N),
and then disconnect the earth wire (PE) last.
18 Installing Priva Compass - 00.014