Priva
Priva Blue ID hardware
The Compass cabinet has a Priva Blue ID controller and, optionally, a Priva Blue ID Mix I/O module
and other expansion modules. The controller and modules form part of the Priva Blue ID C-Line.
These chapters provide information about the Priva Blue ID C-Line hardware.
The Priva Blue ID C-Line has modules with and without manual operation and signalling.
Compass only uses Priva Blue ID C-Line modules without manual operation and signalling.
Earth contact
The modules have a functional earth contact (A). It is not therefore a safety earth. The functional
ground makes contact with the DIN rail when the hardware is installed. This guarantees the grounding
of the hardware, provided that the DIN rail itself is also earthed.
Switching system power on and off
A. on/off button
You use the on/off button (A) to switch the system power on and off.
•
switch off: place button (A) in position 0
•
switch on: place button (A) in position 1
Do not switch expansion modules off by removing the I/O bus cable.
32
Installing Priva Compass - 00.014