Maintenance Of Meteorological Station; Meteorological Station Specifications - Priva Compass Installation Manual

Priva
The sensors are supplied with 10-metre screened cable. It is recommend that you do not
shorten these cables when mounting the sensors. Coil the remaining length of cable or leave
a loop; this will simplify any future expansion of the Meteorological station with additional
crossbars of mast sections.
Mounting the clamping blocks
1. Upper mast section
2. Lower mast section
3. Clamping block

Maintenance of Meteorological station

Check the condition of the mast section's fastening bolts at least once a year (the bolts must not be
rusted).

Meteorological station specifications

Construction
Supports material
Mast component material
Clamping block material
Wall bracket material
Dimensions (l x w x h)
56
4. Bolt for clamping block
5. Nut for clamping block
6. Socket-head screw
two supports
two mast components
clamping blocks
wall brackets
installation material
aluminium (AlMg1)
Al 50 St
aluminium
galvanized steel
500 x 700 x 3200 mm
Installing Priva Compass - 00.014