Table of Contents
Advertisement
Priva
When positioning the cabinet, bear the following in mind:
•
Position the cabinet against a wall or other solid background.
•
Ensure there is sufficient space around the cabinet.
•
Ensure there is sufficient space underneath the cabinet to feed the wiring through.
•
Ensure there is sufficient space above and next to the cabinet for the dissipation of heat.
•
Use the 4 specified mounting holes for installing the cabinet.
•
Use M8 bolts or M8 screws that can bear the weight of the cabinet.
•
The cabinet is heavy. Have more than one person hold the housing in the correct position while
placing it. Or use a suitable lifting device.
•
Position the cabinet in a space that meets the environmental requirements.
•
Make sure the space and the cabinet are easily accessible. There must be enough space to open
the cabinet for maintenance and installation. This is especially important if you need to switch
off the system with the circuit breaker in the event of problems.
Mounting holes
Recommended space (in cm) to be left free around the cabinet
16
Installing Priva Compass - 00.014
Advertisement
Table of Contents
Troubleshooting
