Priva Compass Installation Manual page 100

Priva
1. Install the trough in such a way that the drain water can easily flow into the tray of the Drain
water sensor. The trough must have a slope of around 1%.
2. Hang the Drain water sensor at the end of the trough.
In the case of slab weighing and/or Root Optimizer, do not hang the Drain water sensor
at the end of the trough, but in a different place. If the Drain water sensor is suspended
at the end of the trough, the drain will also be included, which will disrupt the
measurement.
3. Cover the substrate slab, the trough and the Drain water sensor with foil, to prevent dirt and
algae growth in the Drain water sensor.
98 Installing Priva Compass - 00.014