Priva
Meteorological station
Meteorological station
The Meteorological station is designed for the optimum positioning of the weather sensors. By
installing these sensors at an adequate height, the effect of interference can be limited. The
Meteorological station is supplied as a kit comprised of two supports, two mast sections, clamping
blocks, wall brackets, and mounting materials. This chapter describes the composition and the
construction of the Meteorological station.
Positioning the meteorological station
See
Positioning the weather station (page
Fitting the sensors
Fitting sensors on the supports of the Meteorological station
The Meteorological Station has two supports on which a total of six sensors can be mounted. The
sensors must be fitted to specific positions on the supports.
The bottommost support must be situated in a north-south alignment, and the upper support must
be in an east-west alignment.
5
1
2
6
A
A: further north than 15° N
B: further north than 15° N
52
44).
N
4
3
6
1
2
3
5
B
Installing Priva Compass - 00.014
4