Disassembling Hardware - Priva Compass Installation Manual

Priva

Disassembling hardware

Performing a shutdown
In the case of a shutdown, the running processes on the controller are closed down properly. This
relates, for instance, to read and write actions to memory and communication with other modules
and systems.
1. Depress button (A) and hold it down for 2 seconds.
2. Release button (A).
The shutdown is complete when the blue LED is off and the green I/O LEDs flash.
Disassembling hardware
1. Perform a shutdown.
2. Switch the system power off.
3. Turn off the voltage for the entire system.
4. Label the wiring before disconnecting it.
5. You can remove the connectors complete with wiring, or disconnect the wiring from the
connectors.
Remove a connector by gently pulling it forward.
Disconnect the wiring from the connector by pressing the catch (A) with a screwdriver and
removing the wire.
Do not turn the screwdriver. This will damage the hardware.
40
When working on the system, be careful with regard to parts carrying a dangerous voltage.
Installing Priva Compass - 00.014