Weather Interface Wi2; Connecting Sensors To The Weather Interface Wi2 - Priva Compass Installation Manual

Priva

Weather interface WI2

Not all sensors can be directly connected to an I/O module of Priva Blue ID connected; for these
sensors, the Weather interface WI2 is required. The interface ensures that the output signals of the
sensors are brought to the right level so that the controller can read them.
The interface is supplied in a splashproof housing, which enables it to be used either inside or outside.
In most cases, the interface will be mounted on or near the Meteorological station.

Connecting sensors to the Weather interface WI2

Connect the following to the interface:
• 24 VAC power supply for the interface
• sensors
• output signals of sensors to the Priva Blue ID modules.
58 Installing Priva Compass - 00.014