Mounting Of Wsc11 - Priva Compass Installation Manual

LED
green
blue

Mounting of WSC11

The working position of the WSC11 is horizontal (plug connection underneath). During
installation, de-installation, transport or maintenance of the WSC11 make sure that no water
gets into the device and connector.
The intended installation of the WSC11 requires:
• a tube with an outside diameter of ≤25mm and an inside diameter of ≥19mm
or
• a mounting bracket (optional, article no. 3779242)
1. If you are using a mounting bracket, remove the corner guides.
2. Pull the plug of the connecting cable through the tube or mounting bracket.
3. Mount the WSC11 on the tube or mounting bracket.
4. Use a compass to detect a prominent object (tree, building etc.) to the north.
Installing Priva Compass - 00.014
Behaviour
flashing (1 Hz)
flashing
Priva weather station WSC11
Meaning
The WSC is ready for operation and has not
received a query command for 3 seconds or
longer.
The current wind speed.
The correlation between the flash frequency and
wind speed is shown in the following figure:
47