Dsl-Cell-50A As Cpe - Lucent Technologies DSLPipe/CellPipe Series Quick Setup Manual

DSL-Cell-50A as CPE

Table 3-10.Confiuging the CellPipe 50A as CPE
DSLPipe/CellPipe Quick Setup
Example Scenarios
1. Assume you are setting up ATM
over ADSL with VPI = 1, VCI = 10.
Assume you will be using a VC
connection with IP routing.
Configuring the unit
DSLPipe/CellPipe Quick Setup
CellPipe Configuration
Configure >
Chan Usage = Leased/Unused
My Addr = 204.215.204.215
Encaps = ATM
Mux Type = ATM-VC
Vpi = 1
Vci = 10
Configure > Ethernet > Connections >
Station = ex1
Active = Yes
Encaps = ATM
Dial # = N/A
Route IP = Yes
Bridge = No
Dial brdcast = N/A
Ip options...
LAN Adrs = 10.10.10.10
Telco options...
Call Type = Nailed
Group = 1
3-25