Displaying The Frame Relay Dlci - Lucent Technologies DSLPipe/CellPipe Series Quick Setup Manual

Table 3-4. Frame Relay status screen
Fields
OutFrame

Displaying the Frame Relay DLCI

To display the Frame Relay DLCI, type the following:
DLCI = 16
input pkts
input octets 223406698
Table 3-5. Frame Relay DLCI status screen
Fields
DLCI
Status
input pkts
output pkts
input octets
DSLPipe/CellPipe Quick Setup
lucent% show fr dlci
The following list displays:
Status = Active
293723
Table 3-5 provides a description of each field.
Description
The number of packets sent by the unit since the
connection came up.
output pkts
output octets
Description
DLCI number of the PVC. The default is 16.
Active or Inactive. Active if the Frame Relay
connection is up. Inactive if the Frame Relay
connection is down.
Number of packets received by the unit since the
connection became active.
Number of packets sent by the unit since the
connection became active.
Number of bytes received by the unit since the
connection became active.
Configuring the unit
DSLPipe/CellPipe Quick Setup
496500
249929584
3-15