Lucent Technologies DSLPipe/CellPipe Series Quick Setup Manual page 66

Configuring the unit
DSLPipe/CellPipe Quick Setup
Table 3-10.Confiuging the CellPipe 50A as CPE
3-26
Example Scenarios
2. Assume you are setting up ATM
over ADSL with VPI = 5, VCI = 20.
Assume you will be using a LLC
connection with bridging. Also
assume that you want to specify a
constant rate of 1000 cells/second.
CellPipe Configuration
Configure >
Chan Usage = Leased/Unused
My Addr = 204.215.204.215
Encaps = ATM
Mux Type = ATM-LLC
Vpi = 5
Vci = 20
Ethernet > Connections >
Station = ex1
Active = Yes
Encaps = ATM
Dial # = N/A
Route IP = No
Bridge = Yes
Dial brdcast = Yes
Encaps options...
MUX Type = ATM-LLC
vpi = 5
vci = 20
Service Type = Constant
Service Rate = 1000
Telco options...
Call Type = Nailed
Group = 1
DSLPipe/CellPipe Quick Setup