Opening A Menu - Lucent Technologies DSLPipe/CellPipe Series Quick Setup Manual

Follow these guidelines to navigate the DSLPipe/CellPipe menu system.

Opening a menu

To open a menu, select it by placing the cursor (>) in front of the item and pressing
Enter.
Main Edit Menu
>Configure...
00-000 System
20-000 Ethernet
To move the cursor down, press Ctrl-N (next) or the Down-Arrow key. To move it up,
press Ctrl-P (previous) or the Up-Arrow key.
DSLPipe/CellPipe Quick Setup
Use the Up and Down arrow keys to
navigate up and down through the
menus. A v at the end of the bottom line
of a menu or status window listing
indicates that more lines follow. A ^ at
the end of the top line indicates
additional lines above.
You can also use Ctrl-N and Ctrl-P.
Use Enter to do any of the following:
• Cycle through available values for a
parameter.
• Open an input field for a parameter
that doesn't have preset values.
• Move to the next field to make a
selection or keep an entry.
Use the Esc key to exit a menu. You
always have the choice of saving or
discarding your changes before exiting.
Getting ready to configure
DSLPipe/CellPipe Quick Setup
2-5