Dsl-Acap As Cpe - Lucent Technologies DSLPipe/CellPipe Series Quick Setup Manual

DSL-ACAP as CPE

Table 3-8. Configuring the DSL-ACAP as CPE
Example Scenario, as CPE
Assume you are setting up the
RADSL-CAP DSLPipe for a
bridged Frame Relay
connection.
Note: When you set up a
DSLPipe for Frame Relay, you
must create a Connection profile
and a Frame Relay profile.
DSLPipe/CellPipe Quick Setup
DSL-ACAP Configuration
Configure >
Chan Usage = Leased/Unused
My Name = CPE
My Addr = 192.168.200.1/
Rem Name = COE
Rem Addr = 204.215.204.215
Route = None
Bridge = Yes
Ethernet > Connections > COE
Active = Yes
Encaps = FR
Encaps options...
FR Prof = frame-relay
DLCI = 16
Ethernet > Frame Relay > COE
Name=frame-relay
Active=Yes
FR Type= DTE
Link Mgmt=T1.617D
Configuring the unit
DSLPipe/CellPipe Quick Setup
3-23