What's Next; The Dslpipe/Cellpipe Main Window - Lucent Technologies DSLPipe/CellPipe Series Quick Setup Manual

4
Note: The DSL-Cell-20A and the DSL-HSTB units don't display the same software
as the other DSLPipe/CellPipe units.

What's next?

To learn how to navigate within the DSLPipe/CellPipe menu system, see page
page 2-4. To see example configurations, turn to page page 3-18.

The DSLPipe/CellPipe main window

Note: The DSL-Cell-20A and the DSL-HSTB units don't display the same user
interface as the other DSLPipe/CellPipe units. See "Configuring the DSL-Cell-20A"
on page 3-8 and "Configuring the DSL-HSTB unit" on page 3-13 for details.
DSLPipe/CellPipe Quick Setup
Your communications program should now display the DSLPipe/CellPipe main
window (see page page 2-3). If it does not, press Ctrl-L to reload or refresh the
screen. The part of the screen you use to configure the DSLPipe/CellPipe is on
the left and looks like this:
Configure...
Chan Usage= Leased/Unused
My Num A= N/A
My Num B= N/A
My Name=
My Addr=
Rem Name=
Rem Addr=
Getting ready to configure
DSLPipe/CellPipe Quick Setup
2-3