Checking The Activity Of Dslpipe/Cellpipe Led Lights - Lucent Technologies DSLPipe/CellPipe Series Quick Setup Manual

Installing the unit
DSLPipe/CellPipe Quick Setup
Checking the activity of DSLPipe/CellPipe LED
lights
Observe the activity pattern of the lights at the front of the DSLPipe/CellPipe to
verify that your unit is connected properly. When all the cables are connected, verify
that:
•
•
•
•
1-22
The pwr light turns on and remains on.
The wan light is on initially, blinks until a connection is established, and then
remains on.
The lnk light is on if there is an ethernet connection.
The con light is on initially and then turns off.
DSLPipe/CellPipe Quick Setup