Lucent Technologies DSLPipe/CellPipe Series Quick Setup Manual page 72

Configuring the unit
DSLPipe/CellPipe Quick Setup
Table 3-11.Configuring the DSLPipe 50S as CPE
Scenario
3. (Continued)
3-32
DSL-Cell-50S configuration
Ethernet > Connections >
ex3
Station = ex3 (already
assigned in the Configure
menu)
Active = Yes (set to Yes
when saved in the Config-
ure menu)
Encaps = ATM (already
assigned in the Configure
menu)
Route IP = No
Route IPX = No
Bridge = Yes (already
assigned in the Configure
menu)
Dial brdcast = Yes
Encaps options...
MUX Type = ATM-LLC
(already assigned in
the Configure menu)
vpi = 5 (already
assigned in the
Configure menu)
vci = 20 (already
assigned in the
Configure menu)
* Service Type =
Constant
* Service Rate = 1000
Inverse ARP = N/A
DSLPipe/CellPipe Quick Setup