Displaying Adsl Status - Lucent Technologies DSLPipe/CellPipe Series Quick Setup Manual

Configuring the unit
DSLPipe/CellPipe Quick Setup
Table 3-2. Fields in the ATM status screen
Fields
VCI
input pkts/
input OK pkts
output
pkts/output OK
pkts
input cells/
input OK cells
output
cells/output OK
cells
f4...rx --
f5...tx

Displaying ADSL status

To see statistics on the ATM connection, type the following:
3-10
Description
Virtual Circuit Identifier. The default is 35.
Number of packets received by the unit since the
connection became active. The input pkts value
should match the input OK pkts value.
Number of packets sent by the unit since the connection
became active. The output pkts value should match
the output OK pkts value.
Number of cells received by the unit since the connection
became active. The input cells value should match
the input OK cells value.
Number of packets sent by the unit since the connection
became active.
The output cells value should match the output
OK cells value.
If these numbers increment quickly in a short period of
time, it means that the CO site is sending signals about
problems in the ATM backbone. You may find that the
Internet connection is not stable.
lucent% show adsl stats
The following screen of information displays:
ADSL Chipset Version: <Version>
ANSI Version: <Version>
Line Status: Up
Upstream Speed: <Kbps>
DSLPipe/CellPipe Quick Setup