Displaying Frame Relay Status - Lucent Technologies DSLPipe/CellPipe Series Quick Setup Manual

Configuring the unit
DSLPipe/CellPipe Quick Setup
show fr ?
show fr help
show fr stats
show fr dlci

Displaying Frame Relay status

To see statistics on the Frame Relay connection, type the following:
Name
DSLFrame
Table 3-4. Frame Relay status screen
Fields
Name
Type
Status
MTU
InFrame
3-14
The following list appears:
Display help information
Display help information
Display Frame Relay information
Display all DLCI information
lucent% show fr stats
The following list displays:
Type Status
DTE Up
Table 3-4 provides a description of each field.
MTU
1532
Description
Name of the DSL-HSTB unit. The default is
DSLFrame.
DTE or DCE. The unit is always configured as DTE.
Either Up or Down. Up means the Frame Relay link
is up. Down means the Frame Relay link is down.
Maximum Transmission Unit size.
The number of received packets sent by the unit since
the connection came up.
InFrame OutFrame
275 219
DSLPipe/CellPipe Quick Setup