Removing The Sliding Window; Replacing The Led Illumination - Leica CM1520 Instructions For Use Manual

9
Cleaning, Disinfection, Maintenance

9.3.3 Removing the sliding window

1. Switch off the instrument at the circuit breaker.
2. Disconnect the power plug.
3. Slightly lift the sliding window
out to the front.
4. Carry out disinfection/cleaning tasks.
5. Reinsert the sliding window.
6. Connect the instrument to the power supply again and switch it on.
1
2
Fig. 59
.

9.3.4 Replacing the LED illumination

The LED illumination is designed for maximum life span. In case of damage, please contact Leica
customer service to arrange replacement. For further details, see (→ P. 97 – 11. Warranty and Service).
70
(→ "Fig. 59-1") holding it by the grip (→ "Fig. 59-2") and pull it
Version 2.0, Revision K