Table of Contents
Advertisement
7
Daily Use of the Instrument
7
4
3
Fig. 44
• To remove the knife, follow these instructions in reverse order.
• Open the wingscrews by turning them counterclockwise and then pull the knife out to the side.
Warning
• After the knife has been removed from the knife holder, it is stored securely in the knife case
(→ "Fig. 45"). NEVER place the knife without the knife case onto the work surface next to the
instrument!
• To prevent the knife from rust, close knife case when the knife is completely dry.
Fig. 45
Safety guard/lateral movement for knife holder CN
The safety guard
handles
(→ "Fig. 46-19")
length. Always cover exposed parts of the knife blade after sectioning.
50
24
(→ "Fig. 46-18")
is secured and integrated into the clamping jaws. The safety guard has
that allow it to be moved. The safety guard is suitable for knives up to 16 cm in
7
4
Version 2.0, Revision K
Advertisement
Table of Contents
